技术支持
应用方案
方案需求
Application Solutions
CAN (2ch), LIN, ADC (16ch), 56 MHz
说明
MB96300 系列基于富士通先进的16FX 架构(16位,采用指令流水线,可实现类似RISC的性能),CPU使用的指令集与现有的16LX 系列相同——可轻松实现从16LX 向新型16FX 产品的软件移植。与上一代产品相比,16FX实现了大幅度的性能提升——即使在相同的工作频率下,也可降低功耗和缩短启动时间。
为了在优化功耗条件下实现最高处理速度,可选择使用内部的PLL,使得外部4MHz谐振器为CPU提供内部高达56MHz 的工作频率。由此可使最小指令周期降为17.8ns,也可获得优异的EMI 性能。芯片内的一个时钟调制电路可显著降低频谱中的发射峰值。发射功率可由芯片内的调压器降低至最低限度,该调压器可降低内部CPU电压。功能灵活的时钟可提供不同于CPU速度的工作频率给外围资源。
结构图
CPU [Bits] | 16 |
Package | FPT-120P-M21 |
Pincount | 120 |
Flash memory | 288.00 KByte |
Flash Security (read protection) | yes |
RAM (code & data) | 16.00 KByte |
VCC min | 3.00 V |
VCC max | 5.50 V |
Min. Temperature | -40 °C |
Max. Temperature | 125 °C |
Max. CPU frequency | 56.00 MHz |
Clock Supervisor | yes |
DMA channels | 7 |
Max. I/Os | 96 |
A/D Converter | 1 |
A/D channels | 16 |
A/D resolution | 10 bit |
A/D conversion time (min.) | 1.700 µs |
Sound Generator (SG) | 2 |
LCD | 260 |
Stepper Motor Control (SMC) | 5 |
LIN-USART | 5 |
CAN | 2 |
I2C | 1 |
Programmable Pulse Generator (PPG) | 8 |
Output Compare Unit (OCU) | 4 |
Input Capture Unit (ICU) | 8 |
IOTimer | 2 |
Reload Timer | 4 |
Timebase Timer (TBT) | 1 |
Real Time Clock (RTC) | yes |
Watchdog | 1 |
Alarm Comparator | 2 |
Low Voltage Detection (LVD) | yes |
External Bus | yes |
External Bus mode | Multiplexed, non-Multiplexed |
Chip-Selects | 6 |
External IRQ | 8 |
CAN Message Buffers | 32 |
初学者套件 | SK-96380-120PMT |
EVA-Chip | MB96V300 |
Emulation Main Unit | MB2198-01 |
Emulation Pod/Adapter | MB2198-500 |
Probe Cable | MB2198-16FX-120P-M21 |
Socket | NQPACK120SD, HQPACK120SD |
Accessory Kit | ACCESSORIES16 |
Starterkit | SK-96380-120PMT |
Name | Type | Adapter |
FLASH_PROGRAMMER_16LX | serial (async) | |
CONITEC GALEP-4 | serial | Conitec 210865 |
CONITEC GALEP-4 | parallel | Conitec 210888 |
Template project for MB96386rs | 96380_template_96386rs-v11.zip |
Template project for MB96386rw | 96380_template_96386rw-v11.zip |
Template project for MB96387rs | 96380_template_96387rs-v11.zip |
Template project for MB96387rw | 96380_template_96387rw-v11.zip |
This project contains a boot strap loader and can be used to create application specific bootloaders. | 96380_bootloader_uart_async-v10.zip |
请在此查找应用笔记或查看完整的综述:
Shows the differences to be aware of when migrating from a 16LX project to the 16FX | mcu-an-300026-e-v11 |
How to use IO-Ports | mcu-an-300200-e-v11 |
How to use PPG | mcu-an-300201-e-v12 |
Basic functionality of the Reload Timer | mcu-an-300202-e-v11 |
How to use External Interrupts | mcu-an-300203-e-v11 |
How to use the LIN-USART | mcu-an-300205-e-v11 |
Installation of MB2198-01 based emulation system | mcu-an-300209-e-v10 |
Getting started with MB2198-01 based emulation system and Softune | mcu-an-300217-e-v10 |
Recommendations for 16FX hardware setup | mcu-an-300223-e-v13 |
How to get started with a 16FX project in Softune | mcu-an-300233-e-v10 |
销售服务专线:0755-82127888
技术支持专线:0755-82127938
投诉专线:0755-82127989